|
IDP-MONITOR-2 ADDRESSABLE 2 CIRCUIT (D)
|
IDP-MONITOR-2 ADDRESSABLE 2 CIRCUIT (D)
The Dual Monitor Module is intended for use in intelligent, two wire systems
Provides two independent, 2-wire initiating device circuits (IDC), at two separate, consecutive addresses
Capable of monitoring normally open contact fire alarm and supervisory devices, or either normally open or normally closed security devices
The module has a single panel controlled red LED
15 to 32 VDC
Maximum current 5.7 mA
Average Operating Current 750ľA
47K Ohms EOL resistance
Maximum IDC wiring resistance of 1,500 Ohms
32˚F to 120˚F Temperature range
10% to 93% humidity - Non-condensing
4-1/2˝ Height x 4˝ Width x 1-1/4˝ Depth
Mounts to a 4˝ square by 2-1/8˝ deep box
The Dual Monitor Module is intended for use in intelligent, two wire systems
Provides two independent, 2-wire initiating device circuits (IDC), at two separate, consecutive addresses
Capable of monitoring normally open contact fire alarm and supervisory devices, or either normally open or normally closed security devices
The module has a single panel controlled red LED
15 to 32 VDC
Maximum current 5.7 mA
Average Operating Current 750ľA
47K Ohms EOL resistance
Maximum IDC wiring resistance of 1,500 Ohms
32˚F to 120˚F Temperature range
10% to 93% humidity - Non-condensing
4-1/2˝ Height x 4˝ Width x 1-1/4˝ Depth
Mounts to a 4˝ square by 2-1/8˝ deep box
