D73JD-ORB-626 CORRIDOR LOCKSET LESS I/C CORE
Grade Grade 1
Finish 626
Handing Reversible
Backset 2-3/4"

Door Thickness 1-3/8 to 2 Inches
Features and Benefits
-Exceeds 800,000-cycle ANSI Grade 1 requirements
-Exceeds ANSI A156.2, Series 4000 Grade 1 lock knob torque requirements
-Heavy-gauge, cold-rolled steel mechanisms are corrosion treated for normal atmosphere conditions

Door Handing
All Schlage locks are reversible. Hand information is necessary to ensure proper cylinder orientation in keyed functions, and finish of latchbolt and strike for locks that are to be installed on reverse bevel doors.

Specifications

Handing: Keyed functions of knob designs are field reversible.
Door Thickness: 1 3/8” to 2” (35mm–51mm) standard. 2” to 2 1/2” (51mm–64mm) optional.
Backset: 2 3/4” (70 mm) standard. 2 3/8”, 3 3/4” and 5” (60 mm, 95 mm, 127 mm) optional.
Faceplate: Brass, bronze or stainless steel. 11/8” x 21/4” (29 mm x 57mm) square corner, beveled.
Lock Chassis: Steel, zinc dichromate plated for corrosion resistance.
Latch Bolt: Brass, 1/2” (12mm) throw, deadlocking on keyed and exterior functions. 3/4” (19 mm) throw anti-friction latch available for pairs of fire doors.
Exposed Trim: Wrought brass, bronze or stainless steel.
Strike: ANSI curved lip strike 11/4” x 4 7/8” x 13/16”lip to center standard. Optional strikes, lip lengths and ANSI strike box available.
Warranty: Three-year limited warranty.

Certifications

ANSI: Meets or exceeds A156.2 Series 4000, Grade 1 strength and operational requirements.
Federal: Meets FF-H-106C Series 161.
UL / cUL: All locks listed for A label single doors, 4’ x 8’. Letter F and UL symbol on latch front indicate listing. Electrified functions are UL19X Listed for single point locking applications. UL437 Listed locking cylinder optional: specify Primus 20-500 Series cylinder.