MLRK1-COR MLR KIT FOR COR 4/5000 YAL 7000 SERIES
|
CYLP-ULM KIT FOR CORBIN/YALE EXIT DEVICE
The CYLP-UL-M-KIT is a practical and cost-effective way to convert a mechanical Corbin Russwins ED4000, ED5000 or Yale 7000 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device
*Will not operate with Corbin or Yale power supplies
Features:
MM4 Smart Module: On board diagnostics with
audible feedback for adjustment and power issues
PTS: 5 second electronic adjustment for easy
post installation adjustment
Electric dogging rated for continuous duty - Auto
retraction if dogged push pad is pulled from
position
Low current draw: Compatible with most 24VDC,
1A (or greater) regulated power supplies
Field switchable to a High Torque mode
Up to 500 wire run with 2-18 ga wire - Long wire
runs provides installer with convenience of placing
the locking device power supply in a centralized
location; i.e. the same closet as the access panel
8 cable with Quick Connect for MM4 module to
easily connect to power supply lead
3-year no hassle warranty
Accessories:
Request to Exit - Available on-board or as a field
installable kit.
Voltage:
Voltage range 22 to 28VDC
System protection unit shutdown when voltage exceeds 28VDC
Average Current Peak 1A (High torque mode 2A)
Average Current Hold -185mA (HT mode 250mA)
PTS adjustment approx. 1/4
Wire run:
500 with 18ga wire 700 with 16ga wire
Product Details:
Box: 6.5 x 3.75: x 2.5
Weight: 2 Lbs
Recommended UL Locking Hardware Power Supply
PS210
The CYLP-UL-M-KIT is a practical and cost-effective way to convert a mechanical Corbin Russwins ED4000, ED5000 or Yale 7000 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device
*Will not operate with Corbin or Yale power supplies
Features:
MM4 Smart Module: On board diagnostics with
audible feedback for adjustment and power issues
PTS: 5 second electronic adjustment for easy
post installation adjustment
Electric dogging rated for continuous duty - Auto
retraction if dogged push pad is pulled from
position
Low current draw: Compatible with most 24VDC,
1A (or greater) regulated power supplies
Field switchable to a High Torque mode
Up to 500 wire run with 2-18 ga wire - Long wire
runs provides installer with convenience of placing
the locking device power supply in a centralized
location; i.e. the same closet as the access panel
8 cable with Quick Connect for MM4 module to
easily connect to power supply lead
3-year no hassle warranty
Accessories:
Request to Exit - Available on-board or as a field
installable kit.
Voltage:
Voltage range 22 to 28VDC
System protection unit shutdown when voltage exceeds 28VDC
Average Current Peak 1A (High torque mode 2A)
Average Current Hold -185mA (HT mode 250mA)
PTS adjustment approx. 1/4
Wire run:
500 with 18ga wire 700 with 16ga wire
Product Details:
Box: 6.5 x 3.75: x 2.5
Weight: 2 Lbs
Recommended UL Locking Hardware Power Supply
PS210