|
9K37T15L-STK-626 DORMITORY LEVER LESS CORE
|
93K7T15LSTK626 LEVER LESS CORE
For versatile applications, lever by knob trim variations available
Interchangeable core allows for quick re-keying and customized master keying
Strong through-bolt mounting studs increase torque resistance
Heavier rose liner material is highly attack resistant
Stronger retractor springs provide resistance to lever sag
New zinc hubs with a shrouded locking lug, guarantees higher quality and increased torque resistance
Rose locking pin and rose assembly design offers great torque resistance. It prevents the locking pin from twisting, bending, or breaking under attack
The innovative design of the slotted key release cam and locking lug assembly create maximum attack resistance
The outside lever sleeve is a seamless one-piece construction made of a hardened steel alloy that provides additional reinforcement in the locking lug slot
ALL Stanely Best LOCKSETS ARE LESS CORE
Specifications for Best Access Systems 93K locksets
Backset: 2-3/4" standard
Chassis: Critical latch and chassis components are brass or corrosion-treated steel. 2-1/16" diameter to fit 2-1/8" hole in door(conforms to ANSI A1152.2)
Door thickness: Available for 1-3/4" to 2-1/4" doors. Door thickness must be specified
Latch: 9/16" throw. Front: 2-1/4" x 1-1/8" beveled
Lever handles: Lever handles are a high quality zinc alloy. Trim components are brass or bronze. Body is approximately 1-5/8" in diameter; Handle is approximately 4-3/4" long (from center-line of chassis). #14 and #15 levers conform to California Administrative Code Title 19 and Title 24. All three styles of levers conform to the Illinois Accessibility Standard
Mounting: In addition to standard door preparation (ANSI A115.2 for 1-3/4" doors), two additional holes are needed for through-bolt. Through-bolts require two 5/16" diameter holes located at 12 o'clock and 6 o'clock positions. A drill jig is provided to ensure accuracy of the holes
Projection on door: Approximately 2-3/4" when mounted on 1-3/4" door
Roses: C - 3" convex, D - 3-1/2" convex,
K- 3" convex no-ring, L- 3-1/2" convex-no ring
Strike:
S3: Conforms to ANSI A115.2 for 1-3/4" doors (4-7/8") x 1-1/4" with curved lip)
For versatile applications, lever by knob trim variations available
Interchangeable core allows for quick re-keying and customized master keying
Strong through-bolt mounting studs increase torque resistance
Heavier rose liner material is highly attack resistant
Stronger retractor springs provide resistance to lever sag
New zinc hubs with a shrouded locking lug, guarantees higher quality and increased torque resistance
Rose locking pin and rose assembly design offers great torque resistance. It prevents the locking pin from twisting, bending, or breaking under attack
The innovative design of the slotted key release cam and locking lug assembly create maximum attack resistance
The outside lever sleeve is a seamless one-piece construction made of a hardened steel alloy that provides additional reinforcement in the locking lug slot
ALL Stanely Best LOCKSETS ARE LESS CORE
Specifications for Best Access Systems 93K locksets
Backset: 2-3/4" standard
Chassis: Critical latch and chassis components are brass or corrosion-treated steel. 2-1/16" diameter to fit 2-1/8" hole in door(conforms to ANSI A1152.2)
Door thickness: Available for 1-3/4" to 2-1/4" doors. Door thickness must be specified
Latch: 9/16" throw. Front: 2-1/4" x 1-1/8" beveled
Lever handles: Lever handles are a high quality zinc alloy. Trim components are brass or bronze. Body is approximately 1-5/8" in diameter; Handle is approximately 4-3/4" long (from center-line of chassis). #14 and #15 levers conform to California Administrative Code Title 19 and Title 24. All three styles of levers conform to the Illinois Accessibility Standard
Mounting: In addition to standard door preparation (ANSI A115.2 for 1-3/4" doors), two additional holes are needed for through-bolt. Through-bolts require two 5/16" diameter holes located at 12 o'clock and 6 o'clock positions. A drill jig is provided to ensure accuracy of the holes
Projection on door: Approximately 2-3/4" when mounted on 1-3/4" door
Roses: C - 3" convex, D - 3-1/2" convex,
K- 3" convex no-ring, L- 3-1/2" convex-no ring
Strike:
S3: Conforms to ANSI A115.2 for 1-3/4" doors (4-7/8") x 1-1/4" with curved lip)
