EFLOW104N16D POWER SUPPLY 24VDC 10-AMP
EFlow104N16D is a power supply/charger that converts a 120VAC 60Hz input into sixteen (16) PTC protected power-limited 24VDC outputs with a total of 10 amps max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries..
120VAC, 60Hz, 4.5 amp
Input fuse: 5A/250V
Sixteen (16) Class 2 Rated PTC protected power-limited outputs
Outputs are rated @ 2 amp
24VDC @ 10.0 amp supply current
Auxiliary Power-Limited output rated @ 1 amp (unswitched)
Over Voltage Protection
Built-in charger for sealed lead acid or gel type batteries
Maximum charge current 1.54 amp
Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
AC fail supervision (form "C" contacts)
Battery fail & presence supervision (form "C" contacts)
Low power shutdown. Shuts down DC output terminals if battery voltage drops below 70-75% (depending on the power supply). Prevents deep battery discharge
Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
Green AC Power LED indicates 120VAC present
AC input, DC output and Battery LED indicators
Short circuit and overload protection
Unit is complete with power supply, enclosure, battery leads and cam lock