CM-150-08 MODULE
The CM150-08 control module is manufactured by Precision Hardware and is specifically designed for use with the ELR150 Series Power Supply. The CM-150-08 controls one Electric Latch Retraction (ELR) device, and offers a time delay feature. By using the time delay feature, users can operate the CM-150-08 control with a variable Latch Retraction period
The CM150-08 control module is user selectable, meaning that there is a zero to four minute delay after input is removed from it. This module also has a red LED D3 indicator that will blink when a fire alarm has interrupted the circuit. On this module, contact operation will follow when the ELR device has been operated successfully. The input voltage of the CM-150-08 is 5-24 VDC or VAC, and the input current is approximately 0.0005 Amp. The minimum pulse of this unit is 0.25 seconds, with a current pulse of 4.75 Amp. The approximate weight of the CM-150-08 control is one pound.

• Normally open
• Input Voltage: 5-24VDC or VAC
• Input Current: approx. 0.005 Amp.
• Minimum pulse width: 0.25 seconds
• Current Pulse: 4.75 Amp. (2 seconds max.)
• Continuous: 3.6 VDC / 0.8 Amp.
• User selectable: 0-4 minutes delay after input is removed Fire Alarm Terminal
• Red LED (D3) blinks when Fire Alarm interrupts circuit
• Provides immediate termination of output
• Accepts normally closed contacts or 5-24 Volts from a listed fire detecting device. Voltage Input:
• Input Current: 0.005 Amp.
• Minimum pulse width: 0.25 seconds
• Relay isolated contacts provided for remote signaling (e.g. door operator)
• Normally open or normally closed contacts are rated at 0.5 Amp., 24VDC or VAC
• Contact operation follows successful operation of the ELR device.