4501-SVR-O-36X84-26D HEAVY DUTY EXIT VERT ROD (PICTURE SHOWN IN ALUMINUM FINISH)
Trim:
- Archer, August, or Withnell Lever with escutcheon
- Pull plate trim
- Rim x optional pull
Covers:
- Stainless steel, zinc
Chassis:
- Aluminum
End Caps:
- Brass, bronze, stainless steel
Door Width:
- 36'' (914 mm) field sizeable to 30'' (762 mm) door
- 48'' (1219 mm) field sizeable to 36'' (914 mm) door
Door Height:
- 7' (2134 mm) - standard
- 8' (2438 mm) - optional
Door Thickness:
- 1-3/4" (44 mm) - standard
Stile Width:
- 5-3/8" (137 mm) minimum stile width required for single door and 5/8" (16 mm) stop
- 4-7/8" (124 mm) minimum stile width required for double doors
- 4-7/8" (124 mm) minimum stile width required for double door x Rim device with double door strike
- All stile widths are measured from door edge
Fasteners:
- Wood and machine screws
- Thru-bolts
Latchbolt:
- Top - 1/2" (13 mm) throw, Pullman type with automatic dead-latching, stainless steel
- Bottom - 1/2" (13 mm) throw, Pullman type, held retracted during door swing, stainless steel
Rod Length:
- Rods for 7' (2134 mm) door - standard
- Rods for 8' (2438 mm) door - optional
- Rods for 10' (3048 mm) door - Optional
- Door height of 6'8" (2032 mm) requires 29-1/4" (743 mm) top rod length
- Door height of 7' (2134 mm) requires 33-1/4" (845 mm) top rod length
- Door height of 8' (2438 mm) requires 45-1/4" (1149 mm) top rod length
- Extension rods available, 2' (610 mm) or 3' (914 mm) for doors over 7' (2134 mm)
Strikes:
- Stainless steel with plated rollers - Included standard with panic devices
- Solid stainless steel - Included standard with fire rated devices
- Surface applied to frame with slotted holes for easy adjustment
- 10' (3048 mm) fire rated device requires strike and hook kit, 4912, for top strike
- Double door strike for use with surface vertical rod and rim device available
Finishes:
- US3, US4, US10, US10B, US26, US26D, US32D
- Trim is only be available in US3, US4, US10, US10B, US26, and US26D
Dogging:
- Hex key dogging standard on panic-rated devices
- Cylinder dogging is available
Notes:
- Center line prep is 40". If door prep elevation is lower, a longer rod will need to be ordered.
- Cylinder dogging available on non-fire rated devices, specify CD
- 3902 1-1/8" (29 mm) mortise cylinder sold separately
- Recommended to be used on appropriately reinforced doors