H355R ADDRESSABLE HEAT DETECTOR, 135 ROR

6.1'' Diameter installed in B350LP - B210LP Base included
2.0'' Height
4.8oz Weight
4°F to 100°F Installation temperature
10% to 93% Relative humidity operating range - Non condensing
B350LP flanged base mounting
15 to 32 Volts DC Peak voltage range
300 A @ 24 VDC Standby current - One communication every 5 seconds with LED blink enabled
6.5 mA @ 24 VDC LED current
135°F Fixed temperature rating
Rate of rise detection - Responds to greater than 15°F/minute
Two wire loop connection
Unit uses base for wiring
Addressable by device
Sleek, low-profile, stylish design
State-of-the-art thermistor technology for fast response
Integral communications and built-in device-type identification
Built in tamper resistant feature
Built in functional test switch activated by external magnet
360° Field viewing angle of the visual alarm indicators
Two bicolor LEDs
LEDs blink red in Normal condition and turn on steady red in Alarm
Visible LEDs blink every time the unit is addressed