EL1690EO DC13 42" ELECTRIFIED VERT ROD EXIT DEV
EL1690EO DC13 42" ELECTRIFIED VERT ROD EXIT DEV
EL1690EO DC13 42" ELECTRIFIED VERT ROD EXIT DEV
Maziuk P/N: DOREL169ON
Manufacturer: DOR-O-MATIC
Retail:
$1327.00 Each
Login or
Register to Order
EL1690EO DC13 3 FT. ELECTRIFIED VERT ROD EXIT DEV (Picture shown in US28)

The design of the EL1690EO is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, single point dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The EL1690EO may also be used to retrofit a 1990 Series crossbar device.

•EL1690EO Electric Latch Retraction No outside trim
•Hand: Right Hand Reverse
•Centercase and end cap are powder-coated black only.
•Strikes: PB48 top.
•Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
•Dogging Feature: Hex key dogging standard, except EL where must use hold back feature.
•Field selectable.
•Sizes: 36" (3' Feet) Wide Doors
•Doors: 1-3/4" thick metal doors.
•Projections: 3-3/8" in neutral position, 2-3/8" in dogged position.
•Pushbar height is 2-1/2.
•Stile: 1-3/4" minimum.
•Electric Functions: EL - electric latch retraction (both EL and ED require PS914 minimum power supply).
•Fasteners: All machine screw mounting. Device mounting fasteners are concealed, latch fasteners are exposed to egress side.
•End Caps: Black powder-coated metal end caps.
•Vertical Rods: 7' standard
•Trim Function: Exit Only
•Current Draw: 24VDC @ 2 ampere or 12VDC @ 4 ampere
•Rod extension kits available.
•Finishes: Anodized Aluminum - Clear US28
•ANSI: Certified ANSI A156.3 2001 Grade 1 standards.
Power Supply PS914
•The series PS914 power supply is designed to operate a wide variety of electrical products. EL panics require PS914-2RS power supply at a minimum. The regulated output power is field selectable for either 24VDC @ 2 ampere or 12VDC @ 4 ampere. Standard input 120 VAC @ 1.0 ampere or 240VAC @ 0.5 ampere available.
•Enclosure is 10" high x 121/2" wide x 5" deep (254mm x 323mm x 127mm), gray with a hinged cover and
•constructed of heavy 19 gauge steel. Five 1/2" x 3/4" (13mm x 19mm)
webmail