B662P-612 2-CYL.D'LOCK 2-3/8" (d)
|
The Schlage B662 is a heavy duty deadbolt, made to withstand both heavy usage and physical attack.
Double Cylinder Deadbolt ANSI: E2141
Stocked with "C" Keyway
Deadbolt thrown or retracted by key either side.
Handing: Locksets are non-handed.
Door Thickness: B600 Series: 1-3/4" to 2" (44mm to 51mm) standard.
Backset: B600Series: 2-3/4" (70mm) standard, 2-3/8" (60mm) optional.
Front: Brass, bronze or stainless steel. 1-1/8" x 2-1/4" (29 mm x 57mm) square corner, beveled.
Dead Bolt: 1” (25 mm) throw with saw-resistant hardened steel insert.
Exposed Trim: Wrought brass, bronze or stainless steel. Thumbturn: Pressure cast zinc, plated to match finish symbols.
Strike: 1-1/4" x 2-3/4" (32mm x 70mm) with steel reinforcer and two 3” screws to resist kick-in attacks standard.
Cylinder & Keys: 6-pin C keyway standard with two nickel silver keys per lock.
Picture shown in 605 (bright brass) finish.
This model stocked in 605 (bright brass), 612 (satin bronze) and 626 (satin chrome) finishes.
Double Cylinder Deadbolt ANSI: E2141
Stocked with "C" Keyway
Deadbolt thrown or retracted by key either side.
Handing: Locksets are non-handed.
Door Thickness: B600 Series: 1-3/4" to 2" (44mm to 51mm) standard.
Backset: B600Series: 2-3/4" (70mm) standard, 2-3/8" (60mm) optional.
Front: Brass, bronze or stainless steel. 1-1/8" x 2-1/4" (29 mm x 57mm) square corner, beveled.
Dead Bolt: 1” (25 mm) throw with saw-resistant hardened steel insert.
Exposed Trim: Wrought brass, bronze or stainless steel. Thumbturn: Pressure cast zinc, plated to match finish symbols.
Strike: 1-1/4" x 2-3/4" (32mm x 70mm) with steel reinforcer and two 3” screws to resist kick-in attacks standard.
Cylinder & Keys: 6-pin C keyway standard with two nickel silver keys per lock.
Picture shown in 605 (bright brass) finish.
This model stocked in 605 (bright brass), 612 (satin bronze) and 626 (satin chrome) finishes.