|
LINQ2 NETWORK COMMUNICATION MODULE
|
LINQ2 NETWORK COMMUNICATION MODULE
Altronix LINQ2 network module is designed to interface with eFlow and MaximalF power supply/chargers. It enables power supply status monitoring and control of two (2) eFlow power supply/chargers over a LAN/WAN or USB connection. LINQ2 provides values on demand for AC fault status, DC current and voltage, as well as Battery fault status and reports conditions via SNMP.
Management interface for up to two (2) eFlow power supply/chargers.
Two (2) network controlled Form "C" relays.
Local and remote control of DC power outputs.
Battery service date indication.
SNMP trap message notifications (instant and delayed).
Connect up to five (5) local or remote trap receivers.
E-mail notification selectable by event.
Event log tracks history.
Programmable via USB or web browser.
Management interface software included (USB flash drive).
Includes interface cables and mounting bracket (attached).
Status Monitoring:
AC status.
Output current draw.
Unit's temperature.
DC output voltage.
Low Battery/Battery presence detection.
Setup:
Site ID identifies installation location
Power supply/charger calibration
DC output(s) control
Relay control (remotely operate HVAC, lighting or security systems).
Environmental:
Operating temperature: -20° to 49° C (-4° to 120.2° F).
Storage temperature: -30° C to 70° C (-22° to 158° F).
Altronix LINQ2 network module is designed to interface with eFlow and MaximalF power supply/chargers. It enables power supply status monitoring and control of two (2) eFlow power supply/chargers over a LAN/WAN or USB connection. LINQ2 provides values on demand for AC fault status, DC current and voltage, as well as Battery fault status and reports conditions via SNMP.
Management interface for up to two (2) eFlow power supply/chargers.
Two (2) network controlled Form "C" relays.
Local and remote control of DC power outputs.
Battery service date indication.
SNMP trap message notifications (instant and delayed).
Connect up to five (5) local or remote trap receivers.
E-mail notification selectable by event.
Event log tracks history.
Programmable via USB or web browser.
Management interface software included (USB flash drive).
Includes interface cables and mounting bracket (attached).
Status Monitoring:
AC status.
Output current draw.
Unit's temperature.
DC output voltage.
Low Battery/Battery presence detection.
Setup:
Site ID identifies installation location
Power supply/charger calibration
DC output(s) control
Relay control (remotely operate HVAC, lighting or security systems).
Environmental:
Operating temperature: -20° to 49° C (-4° to 120.2° F).
Storage temperature: -30° C to 70° C (-22° to 158° F).
