|
EFLOW102N16D 2-(2)Oput PW Sup/Chaw/Fire Alarm 10AM
|
EFLOW102N Two (2) Oput PW Sup/Chaw/Fire Alarm 10AM
eFlow102N is a power supply/charger that converts a 120VAC 60Hz input into a single 12VDC output with a total of 10 amps max. The unit includes a unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Input:
120VAC, 60Hz, 3.5 amp.
Input fuse: 5A/250V.
Output:
12VDC @ 10.0 amp supply current.
Auxiliary Power-Limited output rated @ 1 amp (unswitched).
Over Voltage Protection.
Battery Backup:
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 1.54 amp.
Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
Supervision:
AC fail supervision (form "C" contacts).
Battery fail & presence supervision (form "C" contacts).
Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge.
Fire Alarm Disconnect:
Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
Electrical:
Operating temperature: 0° C to 49° C ambient.
BTU/Hr.: 61.42 BTU/Hr.
System AC input VA requirement: 420VA.
Visual Indicators:
Green AC Power LED indicates 120VAC present.
AC input, DC output and Battery LED indicators.
Additional Features:
Short circuit and overload protection.
Unit is complete with power supply, enclosure, battery leads and cam lock
eFlow102N is a power supply/charger that converts a 120VAC 60Hz input into a single 12VDC output with a total of 10 amps max. The unit includes a unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Input:
120VAC, 60Hz, 3.5 amp.
Input fuse: 5A/250V.
Output:
12VDC @ 10.0 amp supply current.
Auxiliary Power-Limited output rated @ 1 amp (unswitched).
Over Voltage Protection.
Battery Backup:
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 1.54 amp.
Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
Supervision:
AC fail supervision (form "C" contacts).
Battery fail & presence supervision (form "C" contacts).
Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge.
Fire Alarm Disconnect:
Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
Electrical:
Operating temperature: 0° C to 49° C ambient.
BTU/Hr.: 61.42 BTU/Hr.
System AC input VA requirement: 420VA.
Visual Indicators:
Green AC Power LED indicates 120VAC present.
AC input, DC output and Battery LED indicators.
Additional Features:
Short circuit and overload protection.
Unit is complete with power supply, enclosure, battery leads and cam lock
