|
2007-102 SAFE LOCK TITAN D-DRIVE W/KEYPAD (KIT)
|
2007-102 LOCK TITAN D-DRIVE W/ROT.KPD (KIT)
Underwriters Laboratories Listed Type 1, VdS Class 2, CEN B, A2P B, DNV, and RoHS (Reduction of Hazardous Substances) compliant.
• The Titan™ D-Drive™ lock features a new design, motor driven locking mechanism for an extra measure of security and longer battery life.
• Lock bolt retraction and extension is controlled by turning of the keypad, offering dependable manual control of the locking bolt. And the sure-grip,
low profile keypad gives a good, solid feel for the action of the lock.
• The Titan™ D-Drive™ uses an exclusive, no-twist cable design that virtually eliminates the risk of cable damage due to keypad rotation. The cable is
located in a recessed channel in the lock’s extruded aluminum spindle, safely out of harm’s way.
• The Titan™ D-Drive™ uses the standard S&G Magic Module footprint, allowing for easy retrofit without the need for boltwork or mounting screw
location changes. Plus, it’s universally handed for RH, LH, VU, and VD mounting.
• Three modes of operation:
Multi-User—The Master Code, Supervisor Code, and any User Code can open the lock with a single code.
Manager/Employee—Code holders can access the safe only when it’s been enabled by a Master Code or Supervisor Code holder.
Dual Control—Multi-User mode is the factory default, but Dual Control is keypad selectable as an alternate, permanent mode of operation.
Two different lock codes must be entered within one minute of each other to open the safe. This provides a higher level of security.
• Management reset code, one master code, one supervisor code, eight user codes, and one time delay override code*. The management reset code
(MRC) lets you set a new master code of your own choosing if the old master code is lost or forgotten.
• The Titan™ D-Drive™ has a penalty time feature to prevent opening by entering sequential or random codes until a valid code is found.
• All programming is quickly and easily done via the keypad (no separate programming equipment required).
• The lock bolt model withstands 225 lbs. (1000 newtons) of bolt end pressure for a high level of security in boltwork blocking applications.
• An easy to install bolt position sensor switch can be added to trigger alarms, CCTV recorders, or virtually any relay activated security device
Underwriters Laboratories Listed Type 1, VdS Class 2, CEN B, A2P B, DNV, and RoHS (Reduction of Hazardous Substances) compliant.
• The Titan™ D-Drive™ lock features a new design, motor driven locking mechanism for an extra measure of security and longer battery life.
• Lock bolt retraction and extension is controlled by turning of the keypad, offering dependable manual control of the locking bolt. And the sure-grip,
low profile keypad gives a good, solid feel for the action of the lock.
• The Titan™ D-Drive™ uses an exclusive, no-twist cable design that virtually eliminates the risk of cable damage due to keypad rotation. The cable is
located in a recessed channel in the lock’s extruded aluminum spindle, safely out of harm’s way.
• The Titan™ D-Drive™ uses the standard S&G Magic Module footprint, allowing for easy retrofit without the need for boltwork or mounting screw
location changes. Plus, it’s universally handed for RH, LH, VU, and VD mounting.
• Three modes of operation:
Multi-User—The Master Code, Supervisor Code, and any User Code can open the lock with a single code.
Manager/Employee—Code holders can access the safe only when it’s been enabled by a Master Code or Supervisor Code holder.
Dual Control—Multi-User mode is the factory default, but Dual Control is keypad selectable as an alternate, permanent mode of operation.
Two different lock codes must be entered within one minute of each other to open the safe. This provides a higher level of security.
• Management reset code, one master code, one supervisor code, eight user codes, and one time delay override code*. The management reset code
(MRC) lets you set a new master code of your own choosing if the old master code is lost or forgotten.
• The Titan™ D-Drive™ has a penalty time feature to prevent opening by entering sequential or random codes until a valid code is found.
• All programming is quickly and easily done via the keypad (no separate programming equipment required).
• The lock bolt model withstands 225 lbs. (1000 newtons) of bolt end pressure for a high level of security in boltwork blocking applications.
• An easy to install bolt position sensor switch can be added to trigger alarms, CCTV recorders, or virtually any relay activated security device
Related Products
