|
1000 SYSTEM I 1-DOOR SYSTEM
|
1000 SYSTEM I 1-DOOR SYSTEM
The single door System 1 (Model 1000) supports 250 users and each user can be added or deleted in seconds using the built-in Programming Keypad. The programmable relay can control almost any device including an electric Door Lock, arm or disarm an Alarm System, shunt an Alarm Device, or operate a Garage Door.
Users can access a secured area using Keypads, Card Readers, or Data Chip Readers. A Request-To-Exit button can be used to exit an area and a Magnetic Contact can be installed to report Door Ajar and Forced Entry conditions. For applications requiring time restriction of users and/or automatic relay operation, 3 time schedules with 21 time zones are supported.
Users can pass through an entry point secured by a keypad or reader by entering a correct code into the keypad or presenting a valid card or Data Chip to the reader. The System then decides if the user is allowed access to this door at the current time and date, either grants or denies access and logs the transaction. Public access doors can be programmed to automatically lock and unlock according to the programmed time schedules set up by the System Administrator. System 1 can be monitored and reports can be printed from an off-site location using dial-up phone modems.
Supports 1 Door RS485 & RS232 Outputs
Request-To-Exit Input Forced Entry & Door Ajar
Off-Site Set-up & Reporting 3 Programmable Time Schedules
Brilliant 16 Character Display
Input Voltage Class II Transformer 16.5 VAC @15 VA
Door Inputs 1 - Data Inputs Keypad, Card, Chip
Door Relay 1 - Form C 5A @ 30 VDC
Auxiliary Relay 1 - Form C 1A @ 30 VDC
Cabinet Size 7.5" X 8.25" X 3.5"
Backup Supply 1.2 amp Battery
Operating Temperature 0° F - 110° F
The single door System 1 (Model 1000) supports 250 users and each user can be added or deleted in seconds using the built-in Programming Keypad. The programmable relay can control almost any device including an electric Door Lock, arm or disarm an Alarm System, shunt an Alarm Device, or operate a Garage Door.
Users can access a secured area using Keypads, Card Readers, or Data Chip Readers. A Request-To-Exit button can be used to exit an area and a Magnetic Contact can be installed to report Door Ajar and Forced Entry conditions. For applications requiring time restriction of users and/or automatic relay operation, 3 time schedules with 21 time zones are supported.
Users can pass through an entry point secured by a keypad or reader by entering a correct code into the keypad or presenting a valid card or Data Chip to the reader. The System then decides if the user is allowed access to this door at the current time and date, either grants or denies access and logs the transaction. Public access doors can be programmed to automatically lock and unlock according to the programmed time schedules set up by the System Administrator. System 1 can be monitored and reports can be printed from an off-site location using dial-up phone modems.
Supports 1 Door RS485 & RS232 Outputs
Request-To-Exit Input Forced Entry & Door Ajar
Off-Site Set-up & Reporting 3 Programmable Time Schedules
Brilliant 16 Character Display
Input Voltage Class II Transformer 16.5 VAC @15 VA
Door Inputs 1 - Data Inputs Keypad, Card, Chip
Door Relay 1 - Form C 5A @ 30 VDC
Auxiliary Relay 1 - Form C 1A @ 30 VDC
Cabinet Size 7.5" X 8.25" X 3.5"
Backup Supply 1.2 amp Battery
Operating Temperature 0° F - 110° F
